English
Pусский

Home » Blog » Products News » Replacing a Lifeboat While Retaining the Existing Davit: What Must Be Checked?

Replacing a Lifeboat While Retaining the Existing Davit: What Must Be Checked?

Publish Time: 2026-11-10     Origin: Site

Retaining an existing davit may reduce the amount of shipyard work during a lifeboat replacement. The decision depends on the proposed boat, the condition and capacity of the retained equipment, and how the complete installation will be accepted for the vessel. Gather the original drawings and service records before you commit to a replacement model.

New Marine NM50F/C totally enclosed lifeboat. Ask for the arrangement drawing and weight data for the exact configuration proposed. Product page

Check the suspension and release gear interfaces

For a conventional two-fall lifeboat, compare the location and spacing of both lifting points with the existing davit arrangement. Ask the engineering team to review the approved hook assemblies, suspension links, alignment and clearances. The interface drawings should identify which parts stay and which parts are supplied with the new boat.

Overall length gives only an initial indication of fit. New Marine lists two 5 m totally enclosed models, the NML50C and NM50F/C, with published hook distances of 4.64 m and 4.60 m respectively. Use catalogue values to shortlist candidates and use the applicable arrangement drawings for engineering review. New Marine totally enclosed lifeboat range

Check weight, load distribution and the condition of retained equipment

Ask for the proposed boat’s weight data and centre-of-gravity information for the applicable loading conditions. Verify what each weight figure includes, such as fuel, equipment and occupants. The engineering review should consider the load distribution at the suspension points and the limits of the davit, winch, falls and supporting structure. A capacity figure on one nameplate covers only part of that review.

Provide recent survey and service records, including any open defects or modifications to the davit and its foundation. Check which additional examinations are needed with the responsible parties. IMO Resolution MSC.402(96), as amended, addresses maintenance, examination, testing, overhaul and repair of lifeboats and associated equipment within its scope. Confirm the separate installation review and acceptance process with the vessel’s flag Administration or its authorized recognized organization, as applicable. IMO resolution · ClassNK flag instructions

New Marine gravity davit. On a retrofit, identify the existing davit and winch from their own nameplates and drawings. Gravity davit product page

Check the stowed arrangement and movement clearances

Compare the proposed boat’s full outline with the existing cradle, securing arrangements, embarkation access and nearby structures. The review should cover the path from stowage through launching and recovery. Pay attention to protrusions such as fenders, hatches and fittings, along with any charging or other shipboard connections. Mark changes made since the original drawings were issued and have discrepancies checked against the vessel as fitted.

For a free-fall lifeboat, request a separate review of the ramp, supports, restraint and release interfaces, approved launch conditions and secondary launching or recovery arrangements as applicable. The conventional two-fall checks above address a different installation. New Marine free-fall lifeboat range

Send this document pack for preliminary review

Item

What to send

Vessel and project

Vessel name, IMO number where applicable, flag, class, replacement scope and drydock window

Existing boat and release gear

Nameplate photos, make, model, serial numbers, arrangement drawings and available approval documents

Davit and winch

Nameplates, rated load data, drawings, manuals and records of modifications

Installation

Deck and foundation drawings, photographs of the cradle and surrounding area, and documented as-fitted dimensions where available

Equipment condition

Latest inspection and service reports, including open findings

Proposed boat

Exact configuration, arrangement and interface drawings, weight and centre-of-gravity data, and available approval documents

Before ordering, agree who will verify the installation dimensions, review the interfaces, submit any required drawings, and arrange shipboard testing and acceptance. Add these responsibilities and milestones to the purchase scope so that the boat supplier, yard and vessel team can plan against the same drydock dates.

Send the existing boat and davit nameplates, installation photos and available drawings to lifeboat@newmarine.com.cn for a preliminary review. If you are requesting prices for both a replacement boat and a complete boat-and-davit package, specify both options in your RFQ.

CONTACT US

No.211 Shangyang Road,

Dongqian lake Industry Park,

Yinzhou District, NingBo, China

Phone: 0086-574-55227895 / 0086-15158322842

Wechat: UU830008
Email: lifeboat@newmarine.com.cn

SOCIAL NETWORKS

               
Copyright © 1972-2022 Ningbo New Marine Lifesaving Equipment Co., Ltd. All Rights Reserved